EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Photo voltaic Charge Controller is usually a remarkably productive photo voltaic controller made for off-grid photo voltaic methods. Based upon multiphase synchronous rectification technological innovation, it ensures optimized Vitality conversion and process stability for a variety of photovoltaic (PV) apps.
Important Features of your EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Charge Controller technologies for excellent photo voltaic energy harvesting. Crucial options include:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery life.
LCD Display screen with true-time facts checking.
Many Load Management Modes including manual and timer.
Complete Electronic Protections from overcharging, about-discharging, small circuits, and reverse polarity.
Step-by-Step Guide to Setting Up the EPEVER Tracer AN Sequence Controller
one. Unboxing and Planning the Controller
Guarantee all elements are provided: Tracer AN unit, temperature sensor, communication cables, and user manual.
Verify the product range and voltage rankings match your solar panel and battery specs.
two. Mounting the Charge Controller
Choose a well-ventilated, dry locale near the battery financial institution.
Safe the Tracer AN controller using the provided mounting brackets.
Manage right clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Normally follow correct safety protocols and make sure the method is run off ahead of connecting components.
Move 1: Join the battery terminals to the charge controller (optimistic to favourable, negative to unfavorable).
Step two: Join the solar panel array towards the PV enter terminals.
Action 3: Connect the load terminals if utilizing a direct load relationship.
Action 4: Double-Verify all connections for polarity and tightness.
4. Configuring the Controller Configurations
Energy around the controller by connecting the battery first.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, mild Handle.
five. Checking and Information Logging
The Tracer AN Collection supports actual-time monitoring utilizing the MT50 remote meter.
Facts might be logged by using the RS485 interaction port employing software such as Photo voltaic Station Laptop.
Remote checking is achievable with the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Situation one: No Ability Output
Examine battery voltage Click Here and connections.
Verify PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Protection
Confirm the solar array’s voltage score.
Adjust procedure parameters if important.
Problem 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT configurations in the menu.
Great things about the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification engineering makes sure:
Greater Performance: Decreased Electricity losses throughout conversion.
Increased Reliability: Secure overall performance underneath variable loads.
Extended Battery Existence: Steady and accurate charging profiles.
Summary
The EPEVER Photo voltaic Cost Controller with multiphase synchronous rectification technological innovation is definitely an Fantastic option for optimizing solar power era and increasing battery daily life. By following the above set up guide, consumers can assure optimum effectiveness and procedure longevity.