EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Collection Solar Cost Controller is a hugely efficient photo voltaic controller designed for off-grid solar methods. Based on multiphase synchronous rectification know-how, it assures optimized Vitality conversion and procedure stability for a wide range of photovoltaic (PV) applications.
Crucial Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technological know-how for superior solar Strength harvesting. Essential characteristics involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
Liquid crystal display Screen with true-time knowledge monitoring.
Several Load Handle Modes such as manual and timer.
Complete Electronic Protections versus overcharging, over-discharging, short circuits, and reverse polarity.
Move-by-Move Tutorial to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all components are bundled: Tracer AN device, temperature sensor, conversation cables, and consumer manual.
Validate the product variety and voltage rankings match your solar panel and battery technical specs.
two. Mounting the Demand Controller
Pick out a properly-ventilated, dry area near to the battery financial institution.
Safe the Tracer AN controller using the provided mounting brackets.
Manage suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always abide by right security protocols and ensure the procedure is run off just before connecting components.
Move one: Link the battery terminals to the demand controller (constructive visit here to good, negative to detrimental).
Phase two: Link the solar panel array to your PV input terminals.
Stage three: Hook up the load terminals if utilizing a direct load relationship.
Stage 4: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Options
Energy on the controller by connecting the battery 1st.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Handle.
5. Checking and Info Logging
The Tracer AN Series supports authentic-time checking using the MT50 remote meter.
Information is usually logged through the RS485 communication port working with computer software such as Photo voltaic Station PC.
Distant monitoring is achievable Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Problem 1: No Electric power Output
Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Problem two: More than-Voltage Defense
Verify the photo voltaic array’s voltage ranking.
Alter system parameters if needed.
Issue three: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT options during the menu.
Advantages of the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification know-how guarantees:
Better Efficiency: Diminished energy losses all through conversion.
Enhanced Reliability: Steady general performance below variable hundreds.
Longer Battery Daily life: Dependable and correct charging profiles.
Summary
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is an Excellent option for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up guide, consumers can assure maximum effectiveness and process longevity.